Garage Apron Repair in MN

Garage Apron Repair in MNHas the driveway in front of your garage started to sink? Oftentimes, driveways built in Minnesota utilize gravel underneath your driveway footing to even out the surface and connect your driveway to your garage. Overtime, as the gravel underneath begins to settle, the driveway can start to lower and eventually even separate. Even if they didn’t use gravel to build your garage apron up, erosion can essentially do the same amount of damage. If water is able to penetrate the seam between the garage apron and the driveway, the asphalt will eventually settle and become disconnected from your garage. At Seal King Professional Sealcoating, we are here to help fix your garage apron problem. If your garage apron has become a bit of a headache, let our professionals help make your garage driving smooth once again.

Garage Apron Repair Steps

At Seal King Professional Sealcoating, we not only want to repair the current damage that is on your garage apron but also ensure that this does not happen to you again. To do this, we have developed a process for repairing settled aprons that our professionals follow meticulously. This process includes:

  • Measuring – First, we will measure the area and ensure that everything looks straight and perfect. This includes drawing a straight chalk line 2-3 feet from the garage so that we know exactly what we are working with.
  • The Cut – Next, we will utilize diamond blade asphalt saws to cut along the chalk line.
  • Damage Removal – Once the asphalt is cut out, we will carefully remove the damaged and sunken area.
  • Filling – As we fill the foundation holes with new, compacted gravel, we are careful not to miss any spots. We also place a new base gravel that is considered Class V to add to the remaining cut-out sections and compacted areas.
  • Fresh Asphalt – Now the new asphalt is applied to the cut out section using our special hot asphalt mix. It is leveled to the original height of the garage slab to give you that smooth drive right into your driveway.
  • Compacting – Then our plate compactors and asphalt rollers are brought in to perfectly compact the asphalt and give it the professional, manicured look.
  • Clean – Lastly, we clean the entire area thoroughly, making sure there is no debris left near the area. We place a banner around the perimeter and block it off for 24-36 hours for it to dry and cure properly. Then, you are good to go!

If you are looking for a quality garage apron repair service that gives you lasting results, Seal King Professional Sealcoating is the perfect place for you. For more information, give our Minneapolis, MN location a call today at (952) 469-6639.